Skip to content
Export Enquiry
Lohar Forging & Engg. Works

Forged Hardware

Fasteners, lifting and rigging products made in Mumbai.

India-based manufacturing and export enquiries

Fastener Manufacturer in USA

Lohar Forging & Engg. Works supports drawing-led and bulk industrial fastener enquiries from buyers in the United States. Products are manufactured in Mumbai and reviewed against the purchaser’s dimensions, material, thread, finish, testing and documentation requirements.

Request an Export QuoteExport Capability

Market-specific procurement

Supplying industrial buyers in the United States

US procurement packages commonly identify ASTM, ASME, SAE or customer drawing requirements, together with inch or metric threads. The standard designation alone is not enough: revision, grade, dimensional class, coating and acceptance criteria must be stated on the purchase specification.

The company lists the USA among its current export markets. Each new enquiry is still reviewed independently because product suitability, marking, testing and documentation depend on the exact project and importing customer.

Inch and metric requirements

RFQs may use UNC/UNF or metric threads. The drawing and gauging requirement should identify the intended thread system clearly.

Project documentation

Buyers can request material certificates, dimensional records or inspection documents when these are agreed before production.

Industrial applications

Enquiries may serve fabrication, material handling, machinery, marine and infrastructure supply chains.

Import-ready packing

State destination, shipment mode, marking format and packing expectations so these can be reviewed in the quotation.

Country industry context

Applications and buying conditions

United States enquiries can span machinery, steel fabrication, material handling, marine maintenance, energy equipment and infrastructure supply. Procurement documents frequently mix customer drawings with ASTM, ASME or SAE references. Buyers should distinguish the product standard from the material specification and mechanical property requirement. Where inch-series fasteners are required, the RFQ should state UNC or UNF thread, class of fit, dimensional basis and whether mating nuts or washers form part of the supply.

Standards and responsibility

Technical and compliance review

US buyers commonly request material test reports, dimensional inspection, lot identification or a first-article review. These deliverables should be listed before quotation because they affect routing, record retention and commercial scope. The importer should also determine applicable customs, safety and end-use obligations. Lohar Forging does not treat a familiar product name as proof of compliance; each requirement is checked against the supplied revision, acceptance criteria and agreed manufacturing documents.

Buyer evaluation guide

How to evaluate the manufacturing quotation

When comparing a manufacturer for a US requirement, check whether the quotation repeats the exact inch or metric thread callout, grade, finish and document scope. Ask how drawing revisions and non-standard features will be controlled. For assemblies, define mating nuts, washers and coating compatibility rather than assuming they are included. Separate manufacturing lead time from international transit time, and record who is responsible for freight, import clearance and delivery beyond the agreed destination.

Manufacturing scope

Industrial fasteners and lifting hardware

The range is intended for technical and commercial enquiry rather than immediate online purchase. Selection should follow the approved drawing, applicable standard and operating conditions.

Manufacturing feasibility is established from the controlled drawing or applicable standard. Diameter, pitch, thread length, unthreaded shank, head or eye geometry, heat treatment, coating thickness and inspection method are reviewed together; a catalogue family name is never treated as a complete production specification.

Industrial fastener manufacturing and stock preparation for the United States orders
Product preparation and batch handling at Lohar Forging, Mumbai. Exact availability is confirmed against each RFQ.

Eye Bolts

Forged lifting, shoulder and application-specific eye bolt requirements in stainless steel, mild steel and alloy steel.

U Bolts

Round, square and drawing-based U-bolts for pipe supports, equipment mounting and industrial assemblies.

Hex Bolts

Full-thread, partial-thread and project-specified hex bolts with material, grade and finish confirmed at quotation.

Stud Bolts

Fully threaded, double-end, tap-end and reduced-shank stud configurations for machinery and flange-related requirements.

Shackles

D, bow, round-pin and screw-pin shackle enquiries reviewed against intended load direction and documentation.

Turnbuckles

Eye, jaw and hook-end turnbuckle configurations for tensioning and rigging assemblies.

Documentation and engineering review

What to include in the enquiry

For a US quotation, identify the controlling ASTM/ASME/SAE or customer specification where applicable. Avoid requesting a generic equivalent without defining the mechanical and dimensional acceptance criteria.

  • ✓Controlled drawing, product reference or applicable standard and revision.
  • ✓Nominal size, thread system and pitch, overall length and critical tolerances.
  • ✓Material grade, strength class, heat treatment and surface finish.
  • ✓Required quantity, packing, marking, inspection and traceability documents.
Lohar Forging product range for industrial fastener buyers in the United States

Quality and commercial control

From RFQ review to export dispatch

The process begins with a technical review of the drawing, standard and required quantity. Material and manufacturing route are then considered against the requested grade, geometry, tolerance and finish. Inspection, documentation, marking, packaging and dispatch requirements are agreed before production rather than assumed after the parts are made.

For repeat requirements, quote and purchase documents should retain the same drawing revision and acceptance criteria. When a revision changes, the changed dimensions or clauses should be identified clearly. This provides a stronger basis for consistent production, batch traceability and incoming inspection at the destination.

A useful technical enquiry also explains the operating environment and the function of the component. Outdoor, marine, high-temperature, vibration, cyclic-load or corrosive service can change the required material, coating, inspection and maintenance approach. Lohar Forging reviews manufacturability against the information supplied; the buyer, designer or responsible engineer retains responsibility for final product selection, joint design, load calculations, installation method and regulatory approval.

Review manufacturing and quality process →

Before requesting a quotation

Avoid generic product descriptions

Terms such as heavy duty, standard size, stainless steel or high tensile are not complete manufacturing specifications. Include the numerical grade, dimensions, thread details, finish specification, quantity, inspection criteria and destination. Where a drawing exists, provide its number and revision so the quotation and subsequent production refer to the same controlled requirement.

For replacement components, share an original drawing whenever possible. Measurements taken from a worn sample may not represent the original tolerance or thread form. Identifying the equipment, joint function and mating components helps the manufacturing team flag missing information before material is committed.

Send Technical RFQ

Other international markets

Saudi ArabiaQatarBangladeshNepalUAEUnited KingdomAustraliaCanadaGermany

Frequently Asked Questions

Can you quote inch-thread fasteners for the USA?+

Yes. Share the complete UNC or UNF thread callout, diameter, length, grade, finish and inspection requirement for review.

Do you supply certificates with US export orders?+

Certificate and inspection requirements can be reviewed when they are stated in the RFQ and agreed in the quotation.

Are prices listed online?+

No. These are specification-led B2B products; pricing depends on material, dimensions, quantity, testing, packing and delivery terms.

Send Your the United States Requirement

Share the drawing, specification, quantity and destination for manufacturing review and quotation.

Request a Quote View Export Capability

Quick Summary

Lohar Forging & Engg. Works supports drawing-led and bulk industrial fastener enquiries from buyers in the United States. Products are manufactured in Mumbai and reviewed against the purchaser’s dimensions, material, thread, finish, testing and documentation requirements.

Key Takeaways

  • ▸Inch and metric requirements: RFQs may use UNC/UNF or metric threads. The drawing and gauging requirement should identify the intended thread system clearly.
  • ▸Project documentation: Buyers can request material certificates, dimensional records or inspection documents when these are agreed before production.
  • ▸Industrial applications: Enquiries may serve fabrication, material handling, machinery, marine and infrastructure supply chains.
  • ▸Import-ready packing: State destination, shipment mode, marking format and packing expectations so these can be reviewed in the quotation.

Frequently Asked Questions

Can you quote inch-thread fasteners for the USA?+

Yes. Share the complete UNC or UNF thread callout, diameter, length, grade, finish and inspection requirement for review.

Do you supply certificates with US export orders?+

Certificate and inspection requirements can be reviewed when they are stated in the RFQ and agreed in the quotation.

Are prices listed online?+

No. These are specification-led B2B products; pricing depends on material, dimensions, quantity, testing, packing and delivery terms.

24 hour quote response

Need Forged Hardware Fast?

Get a quote within 24 hours. Bulk & export enquiries welcome across our markets.

WhatsApp Us

WhatsApp

Quick response on mobile

Hello! Need help with forged hardware, bulk orders or a quick quote? Chat with us on WhatsApp and we’ll respond fast.
Open Chat